|
|
|
|
2-1/4" thick hard rock maple top finished with penetrating oil. Galvanized base is fabricated from 1-1/2" square tube, 16 gauge, pre-galvanized - not plated. Legs are 1-5/8" O.D., round 16 gauge tubing, pre-galvanized - not plated. Bracing and bin stop are 1-1/4 O.D. round 16 gauge tubing, pre-galvanized, not plated, secured in a fixed position, 12" above floor. Adjustable bullet feet. Optional drawers, casters, pot racks, etc. available. All models are approved by the National Sanitation Foundation. Shipped knocked down. NSF. 
|
|
|
Stainless steel base with adjustable undershelf. 14 gauge type 304 stainless steel tabletop. Adjustable, heavy gauge type 304 stainless steel undershelf. Legs are 1-5/8" O.D. tubular 16 gauge type 304 stainless steel, stainless steel gussets, stainless steel hat channel, 1" adjustable stainless steel feet. Front and rear with rolled down edges and sides turned down 90°. Easy assembly. Unsurpassed strength and performance. NSF Listed.
|
|
|
Stainless steel base with adjustable undershelf. 14 gauge type 304 stainless steel tabletop. Adjustable, heavy gauge type 304 stainless steel undershelf. Legs are 1-5/8" O.D. tubular 16 gauge type 304 stainless steel, stainless steel gussets, stainless steel hat channel, 1" adjustable stainless steel feet. Front and rear with rolled down edges and sides turned down 90°. Easy assembly. Unsurpassed strength and performance. NSF Listed.
|
|
|
Stainless steel tubular base. Features a marine counter edge on front and ends. Easy assembly. Unsurpassed strength and performance. NSF Listed.
|
|
|
For stainless steel and maple tops. Type 304 stainless steel construction.
|
|
|
Highly polished, 16 gauge, type 304 stainless steel flat top. Stainless steel legs with adjustable stainless steel undershelf. 24" working height. NSF Listed.
|
|
|
All stainless steel. "Clean construction". Designed with cleanliness in mind. All doors and panels have safety edges and are free from bacteria-gathering crevices. All components are constructed of 18 gauge, type 304 18-8 stainless steel. Doors are removable for easy cleaning. Top is sloped forward to help reduce contamination build-up. Double panel doors. Cabinets are available with hinged, sliding or open doors. Center shelves feature safety edges. Shelves are stationary to reduce the risk of tipping. NSF Listed.
|
|
|
All Models feature 4 1/2" rear backsplash. 14 gauge type 304 stainless steel top and stainless steel cabinet. Adjustable bullet feet.
|
|
|
Heavy 18 gauge 400 series stainless steel with welded and blended corners. Galvanized steel undershelf and legs. Adjustable bullet feet. NSF.
|
|
|
Robo-Cart (plates not included)
|
 |
Energy Star
This product incorporates advanced technologies that use 10–50% less energy than standard models.
|
 |
Environmentally Friendly
This product contains environmental attributes or features (e.g. water conserving, lead-free, etc.) as described in the item detail. |
 |
National Sanitation Foundation
The NSF mark on food service equipment means that everything from the product design to materials used to create the product have been tested and conform to food equipment safety and sanitization standards. |
 |
Recycled
This product contains recycled content as described in the item detail. |
 |
Shipboard Use
This product has been evaluated and tested, as required, by the U.S. Navy and documented as being approved for use on Navy ships. |
 |
Underwriters Laboratories
The UL Mark on a product means that UL has tested and evaluated representative samples of that product and determined that they meet UL requirements. Under a variety of programs products are periodically checked by UL at the manufacturing facility to make sure they continue to meet UL requirements. |
|
